Results 1 to 6 of 6

Thread: SKMap route drawing issue

  1. #1
    Etablierter skobbler
    Join Date
    29.08.2014
    Posts
    18

    SKMap route drawing issue

    Hi,
    Actually the route is drawn in skmap but when i click pin out side of actual path (yellow line on left side), the route is not drawn between green pin and red pin. However, if i place two pins within the road then route is drawn.
    I have explained my issue in image bellow. Please have a look.
    issue.jpg
    Thank you in advance

  2. #2
    Oberskobbler
    Join Date
    22.07.2014
    Posts
    399
    When you have all the 3 points present (start -> viaPoint -> destination) - the route is successfully calculated? (do you get a valid route inside didFinishRouteCalculationWithInfo?) or it fails? (visible in didFailWithErrorCode)
    We're trying to asses if this is a routing issue – cannot calculate the route – or a rendering issue – cannot display the route on the map.

  3. #3
    Etablierter skobbler
    Join Date
    29.08.2014
    Posts
    18
    It successfully calls didFinishRouteCalculationWithInfo method with valid datas.
    The problem is, among many pins, if one pin is somewhere skmap cant draw route, it wont draw rest route too. And it dont call didFailWithErrorCode method too. I would like to make more clear with image. Please have a look.
    issue.jpg

  4. #4
    Oberskobbler
    Join Date
    22.07.2014
    Posts
    399
    Hello,

    Can you please send us the code as we cannot understand clear what is the problem. By "removing the pin" do you mean by removing the pin from the map or from the route?

  5. #5
    Etablierter skobbler
    Join Date
    29.08.2014
    Posts
    18
    Hi
    It may be difficult to get you the full codebase, however I will look into it.
    The problem is that is a pin is not placed near or close to a road, then the route will not draw and this effects the complete route that may have 10 waypoints etc.
    There must be some limit where the 'nearest available road point' is selected?

  6. #6
    Oberskobbler
    Join Date
    22.07.2014
    Posts
    399
    Allow me to check this information internally - I will get back with an answer from the devs.

    Can you please confirm - is the route failing?
    Also could you please add the code for SKRouteSettings?

    Update:
    Make sure the pin that is near the sea is not in a private area/ private port- If this is the case the route won't be generated
    Last edited by Adela_Silvia; 23.06.2015 at 10:22.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •